Leaping Fish Water Fountain

INSTALLING A FOUNTAIN

In addition to their beauty, Brass Baron Fountains are readily portable and easy to install.

Three elements are required for installation:

* The fountain sculpture...is plumbed with copper tubing with a hose barb welded to the tubing at the bottom of the sculpture.
* The receptacle to hold water...can be of any non-porous material large enough to receive the water emitting from the fountain sculpture.
* A submersible, recirculating pump...draws the water from the pump submerged in the receptacle through a plastic hose attached to the hose barb on the fountain sculpture. The water runs through the copper tubing inside the sculpture and flows back into the receptacle, thus providing a continuous flow of recirculating water. The pump's electrical cord is plugged into a grounded 3-prong outlet.