Whether they swim in the sea, float on the surface, or wander the shoreline, these charming animals will enhance your garden or pond. For the floating effect, we recommend setting the hippo atop a cinder block or similar material in your pond.
This fountain is made of solid brass, which will not rust. Moisture on brass causes a chemical reaction that gives brass its verdigris patina. An outdoor setting will only enhance the finish of your piece.
Please Note: Pump not included
All pumps are 115 volts/60 hertz.
See More Details
Whether they swim in the sea, float on the surface, or wander the shoreline, these charming animals will enhance your garden or pond
INSTALLING A FOUNTAIN
In addition to their beauty, Brass Baron Fountains are readily portable and easy to install.
Three elements are required for installation:
* The fountain sculpture...is plumbed with copper tubing with a hose barb welded to the tubing at the bottom of the sculpture.
* The receptacle to hold water&can be of any non-porous material large enough to receive the water emitting from the fountain sculpture.
* A submersible, recirculating pump...draws the water from the pump submerged in the receptacle through a plastic hose attached to the hose barb on the fountain sculpture. The water runs through the copper tubing inside the sculpture and flows back into the receptacle, thus providing a continuous flow of recirculating water. The pump's electrical cord is plugged into a grounded 3-prong outlet.
Guarantee